A two component repair and rebuilding material based on a ceramic steel reinforced polymer system, this product provides quality solutions to a wide range of general engineering needs.

Applications include:

• Oversized bearing / bush housings
• Fractured and holed casings
• Leaking tanks
• Scored hydraulic rams
• Sloppy keyways
• Scored machine beds
• Fractured pipe
• Undersized / scored shafts
• Stripped threads
  

A two component repair and rebuilding material based on a ceramic steel reinforced polymer system, this product is designed for applications where accurate alignment or a placement of large volumes of material is required.


Applications include:

• Oversized bearing / bush housings
• Fractured and holed casings
• Distorted flange faces
• Leaking tanks
• Scored machine beds
• Fractured pipes
• Undersized / scored shafts
• Load bearing shims

A two component repair and maintenance compound possessing self lubricating properties, this product has a unique micro-porous structure to trap and hold lubricating oil, minimizing friction and wear at start-up.


Applications include:

• Shaft sleeves
• Bearings
• Bushings
• Guides
• Slideways
• Pipe supports

A breakthrough polymer-based system which provides a superior alternative to conventional repairs, this product combines outstanding performance, better adhesion, greater resistance to heat and moisture, and no objectionable odors. Applications include:

• Scored rams
• Stripped threads
• Leaking tanks
• Split ducting
• Bearings
• Plastic joints

Developed specifically to repair and protect metal surfaces suffering from Corrosion Under Insulation (CUI) without interruption to plant operation, this product is designed for application directly onto hot surfaces (70-150°C / 158-302°F). A single component, heat activated and solvent free product, it begins to react and solidify at temperatures above 70°C (158°F) and is extremely tolerant of less than thoroughly prepared surfaces providing outstanding adhesion and corrosion protection.

Designed specifically for rebuilding all erosion/corrosion damage, this product  has proven to transform metal surfaces suffering from deterioration in performance
and efficiency and is accepted worldwide by:

• Det Norske Veritas
• Bureau Veritas
• U.S. Department of Navy
• British Coal
• American Bureau of Shipping
• Caterpillar, Inc.
• York International

Based on corrosion resistant ceramic steel particles held in a chemically reacting liquid polymer, this product provides outstanding protection for metal surfaces subjected to erosion / corrosion and is accepted worldwide by:

• Det Norske Veritas
• Bureau Veritas
• British Coal
• American Bureau of Shipping
• York International
• UK Water Research Council
• Conoco
• Chevron
• Imperial Tobacco

The unique hydrophobic nature of this coating allows water to simply roll minimizing wear by abrasion through its encapsulated blend of lubricating and abrasion resistant fillers. When applied to fluid flow equipment, this product can reduce power consumption, increase efficiency, lower maintenance costs, and improve hydrodynamic performance.

Belzona® 1341 (Supermetalglide) is suitable for contact with potable water as it is certified to NSF/ANSI Standard 61 and satisfies the UK Drinking Water Inspectorate requirements

By combining a unique blend of inorganic erosion/corrosion resistant reinforcing agents with a radically new, densely cross-linked heat polymer, this product makes protection against erosion/corrosion in high temperature environments a reality.

Designed originally for the offshore oil and gas production industry, where problems of salt water corrosion and chemical attack are intensified by ever-increasing operating temperatures, this product also provides solutions to industries such as petrochemical, power, and metal processing by offering:

• Corrosion protection at immersed conditions at temperatures in excess of 180ºC (356ºF)
• Resistance to wide range of aqueous and hydrocarbon mixtures, high pressures, and erosion
• Ability to post cure in service requiring no additional external heating equipment

Highly specialized composites combining extremely hard closely packing abrasion resistant materials in a polymeric binder, these products are used to repair, protect, or modify equipment subjected to particulate abrasion and erosion. Using a new generation resin technology to enhance the close packing of a unique abrasion resistant filler system, Belzona 1811 and 1812 are a smoother but highly durable composite capable of being applied in thinner layers, providing greater opportunities to modify profiles and improve flow.